Description:
Modified sine wave inverter provides reliable transformation of DC power from a battery into AC power that can then be used to run lights, computers, medical equipment and a broad range of appliances. The inverter with built-in independent radiating fan, additional USB charge interface can connect many devices.

Features:
[Modified Sine Wave Output]AC modified sine wave output has low interference, low noise, and strong load capacity, which does not damage to the service life of the equipment.
[Surge Peak Power] LED Display shows the battery Input voltage, output voltage. DC to AC car power inverter provides 4000 watts DC to AC peak power.
[Mufti-Protection]Built-in fuse to protect your device, safe charging design provides protection against, "+" "-" Reverse connection, overheating, under and over voltage, short-circuiting, overloads, and overcharging.
[Widely Applicable]Lightweight and compact, ideal for vacations, camping, and work trips. It can be plugged into almost any 12V power output vehicle, providing charging opportunities anywhere.

Specifications:
Output Voltage:220V
Color: Blue
Material: Plastic
Waveform: Modified Sine Wave
Surge Peak Power: 4000W
Input Voltage: 12V
Input Voltage Range: 9.5V-15.5V
Output Voltage Range: 220V±10%
Frequency: 50Hz/60Hz
Efficeincy>90%
Circuit topology: push-pull
No-load current: ≤0.7A
Low voltage protection: Minimum protection voltage 9.5V
High voltage protection: Max protection voltage 15.5V
Overload protection: Yes
Output short circuit protection: Yes
Positive and negative reverse connection protection: Yes
Output regulation: Yes
Display Screen: Diaplay Output Voltage, Battery Voltage
Input terminal wiring: terminal
Output interface: 2 * Socket, 4* USB，2* Cigarette lighter interface
USB Output: 2.1A
Car Cigarette Plug Length: 42.5cm / 16.7inch
Battery Clips Length: 46.8cm / 18.4inch
Product Size: 19.5*10.5*6.8cm
Package Size: 7.87x4.4x 2.2 inch
Package Weight: 650g / 1.43lb

Solar guard specifications:
System voltage: 12V / 24V
Current charging value: 30A
Control mode: PWM pulse debugging mode
Battery display: yes
Cut-off voltage discharge: 10.7V (default value, adjustable)
Emission recovery voltage: 12.6V (default value, adjustable)
USB output: 5V / 2A
Standby current: <10mA
Working temperature: -30 ℃ + 60 ℃
Net size / weight: 133 * 70 * 32MM / 131g

Attention:,1. Keep dry, should not let the inverter contact the water or other liquids, keep the inverter away from moisture or water.,2. Cool environment, keep the temperature between 0 Celsius degrees and 40 Celsius degrees. Do not put the inverter next to heat vents or other devices. Try to keep the inverter not be shined directly by the sunshine.